fix(deploy): eGalax touchscreen on batm3 (kernel 6.6 + calibration)

The Dell 9030 AIO's built-in eGalax SAW panel (0eef:0001) was unusable:
touches either didn't register or landed in the wrong place. Full fix:

- Pin linuxPackages_6_6. On 25.11's default 6.12 kernel hid-multitouch
  grabs the controller and mis-parses its HID report (axes read stuck)
  and usbtouchscreen refuses to bind. On 6.6 usbtouchscreen binds and
  produces a clean single-touch ABS device (the known-good internal-SATA
  install runs 6.6.68). Mirrors douro.nix's per-hardware kernel pin.

- udev rule now modprobes usbtouchscreen ITSELF before unbinding usbhid
  and handing over via new_id. On a USB boot systemd-udev-trigger fires
  this rule (~2s) before systemd-modules-load loads usbtouchscreen
  (~12s), so new_id previously hit a not-yet-loaded driver and the panel
  bound to nothing. Loading it inline removes the boot-ordering race.

- Add an X evdev InputClass (99-egalax.conf) so X uses evdev + the
  transformation matrix rather than libinput. Mirrors the working
  internal-SATA install.

- egalax-calibrate: add XAUTHORITY (=/home/bitspire/.Xauthority) — the
  actual boot-time bug. Without the auth cookie xinput died with
  "Invalid MIT-MAGIC-COOKIE-1 key / Unable to connect to X server", so
  the coordinate-transformation matrix was never applied and touches
  landed in the wrong place. Also replace the fixed ExecStartPre sleep
  with a 30s retry loop on the eGalax X device appearing — more robust
  to boot timing than a race against display-manager.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>

apps/machine/electron/hal-service.ts

@@ -221,15 +221,6 @@ export async function initializeHal(config: HalConfig): Promise<HalInstance> {
     },
 
     disableValidator: () => {
-      // If a note is sitting in escrow when we disable (inactivity timeout,
-      // cancel, or leaving the insert screen), return it to the customer.
-      // Disabling alone does NOT release an escrowed note on EBDS — it would
-      // be stranded in the transport until the next power cycle.
-      if (escrowDenomination !== null) {
-        console.log('[HAL] Returning escrowed bill on disable:', escrowDenomination)
-        escrowDenomination = null
-        validator?.reject()
-      }
       validator?.disable()
       validator?.lightOff()
     },

apps/machine/src/config/device.ts

@@ -139,21 +139,11 @@ export const MACHINE_PRESETS: Record<MachineModel, Omit<DeviceConfig, 'fiatCode'
     model: 'batm3',
     validator: {
       type: 'ebds',
-      // MEI bill acceptor (EBDS) on a USB-serial bridge, exposed via the
+      device: '/dev/ttyACM0',
-      // stable udev symlink /dev/ttyMEI (batm3.nix, serial A9YW78OC). The old
-      // /dev/ttyACM0 default assumed a CDC-ACM BNR; this hardware enumerates as
-      // ttyUSB* instead, so ACM0 never existed and cash-in was silently
-      // disabled ("[HAL] No validator"). Per-box override: VITE_LAMASSU_VALIDATOR_DEVICE.
-      device: '/dev/ttyMEI',
     },
     dispenser: {
       type: 'f56',
-      // Fujitsu F56 on a USB-serial bridge, via the stable udev symlink
+      device: '/dev/ttyUSB0',
-      // /dev/ttyF56 (batm3.nix, serial DDDLb103Y23). Avoids the raw
-      // /dev/ttyUSB0, which is enumeration-order dependent and could point at
-      // the wrong adapter after a re-plug/reboot. Per-box override:
-      // VITE_LAMASSU_DISPENSER_DEVICE.
-      device: '/dev/ttyF56',
       cassettes: [
         { denomination: 20, count: 400 },
         { denomination: 1, count: 400 },

apps/machine/src/stores/atm.ts

@@ -458,7 +458,7 @@ export const useAtmStore = defineStore('atm', () => {
     actor.value.subscribe((newSnapshot: SnapshotFrom<ATMMachine>) => {
       const prevSnapshot = snapshot.value
       snapshot.value = newSnapshot
-      console.log('[ATM] State:', JSON.stringify(newSnapshot.value))
+      console.log('[ATM] State:', newSnapshot.value)
 
       // Detect transition into a complete state
       const state = newSnapshot.value
@@ -1374,7 +1374,7 @@ export const useAtmStore = defineStore('atm', () => {
       console.error('[ATM] Cannot send event: machine not initialized')
       return
     }
-    console.log('[ATM] Sending event:', event.type, JSON.stringify(event))
+    console.log('[ATM] Sending event:', event)
     actor.value.send(event)
   }
 

packages/hal/src/validators/ebds/ebds-rs232.ts

@@ -313,13 +313,6 @@ export class EbdsRs232 extends EventEmitter {
   private serial: SerialPort | null = null
   private ack: number = 0x0
   private enabledDenominations: number = 0x00
-  // Latched escrow decision. In EBDS the stack/return choice is NOT a one-shot
-  // message — it's carried as bits in the omnibus poll command, and the device
-  // holds the escrowed note until a poll asserts stack or return. We keep the
-  // action set and re-assert it on every poll until the device leaves escrow
-  // (cleared in _process), so a single dropped/collided frame no longer strands
-  // the note in escrow forever.
-  private pendingAction: 'none' | 'stack' | 'return' = 'none'
   private lastStatusFlags: string | null = null
   private firmwareLogged: boolean = false
 
@@ -412,38 +405,23 @@ export class EbdsRs232 extends EventEmitter {
 
   // -- Commands (Appendix D, Controller Message) ---------------------------
 
-  /**
+  /** Send an Omnibus poll command with current denomination mask */
-   * Command byte 1 for the omnibus poll, encoding any latched escrow action.
-   * `stack` (0x3f) and `return` (0x5f) differ from the plain poll (0x1b) only
-   * in the stack/return bits; while an action is latched every poll re-asserts
-   * it until the device acts.
-   */
-  private commandByte(): number {
-    if (this.pendingAction === 'stack') return 0x3f
-    if (this.pendingAction === 'return') return 0x5f
-    return 0x1b
-  }
-
-  /** Send an Omnibus poll command with the current mask + latched action */
   poll(): void {
-    this._dispatch([this.enabledDenominations, this.commandByte(), 0x10])
+    this._dispatch([this.enabledDenominations, 0x1b, 0x10])
   }
 
-  /** Latch "stack the escrowed note"; re-asserted each poll until it takes. */
+  /** Stack the bill currently in escrow */
   stack(): void {
-    this.pendingAction = 'stack'
+    this._dispatch([this.enabledDenominations, 0x3f, 0x10])
-    this.poll()
   }
 
-  /** Latch "return the escrowed note"; re-asserted each poll until it takes. */
+  /** Reject/return the bill currently in escrow */
   reject(): void {
-    this.pendingAction = 'return'
+    this._dispatch([this.enabledDenominations, 0x5f, 0x10])
-    this.poll()
   }
 
   /** Send initial setup command (disable all, reset state) */
   reset(): void {
-    this.pendingAction = 'none'
     this._dispatch([0x00, 0x1b, 0x10])
   }
 
@@ -492,13 +470,7 @@ export class EbdsRs232 extends EventEmitter {
       validatePacket(packet)
       const result = interpret(packet)
       if (result) {
-        if (result.destructedData) {
+        if (result.destructedData) this._logStatusOnChange(result.destructedData)
-          // Clear a latched stack/return once the device has left escrow — it
-          // is now stacking/returning/idle, so we must stop asserting the
-          // action or it would leak onto the next note.
-          if (!result.destructedData[0].escrowed) this.pendingAction = 'none'
-          this._logStatusOnChange(result.destructedData)
-        }
         this.emit('message', result)
       }
     } catch (ex) {