Test HAL drivers on physical Sintra hardware

padreug commented

2026-06-13 22:02:48 +00:00

Owner

Migrated from aiolabs/lamassu-next#21 — opened by @padreug on 2026-01-27.\n\n## Summary

Validate that the extracted HAL drivers work correctly on a physical Lamassu Sintra ATM.

Prerequisites

#1 - Electron app running
#2 - HAL wired to state machine
#3 - Device configuration

Test Plan

Bill Validator (ID003 / JCM iVIZION)

Validator initializes and connects
Light turns on when enabled
Bills are accepted and denomination detected correctly
Bills can be stacked (accepted)
Bills can be rejected (returned to customer)
Stacker full detection works
Stacker open detection works

Bill Dispenser (F56 / Fujitsu)

Dispenser initializes with correct denominations
Single bill dispense works
Multi-bill dispense works
Bills present detection works
Error handling (jam, empty cassette) works

Integration

Full cash-in flow: insert bills → pay Lightning → complete
Full cash-out flow: select amount → receive payment → dispense

Hardware Details

Device: Lamassu Sintra (Gen 2, UP Board)
Validator: JCM iVIZION at /dev/ttyJ5
Dispenser: Fujitsu F56 at /dev/ttyJ7

Notes

Document any protocol differences or issues discovered during testing.

References

ADR-001 - Architecture decisions
packages/hal/ - HAL implementation

> _Migrated from [aiolabs/lamassu-next#21](https://git.atitlan.io/aiolabs/lamassu-next/issues/21) — opened by @padreug on 2026-01-27._\n\n## Summary Validate that the extracted HAL drivers work correctly on a physical Lamassu Sintra ATM. ## Prerequisites - [ ] #1 - Electron app running - [ ] #2 - HAL wired to state machine - [ ] #3 - Device configuration ## Test Plan ### Bill Validator (ID003 / JCM iVIZION) - [ ] Validator initializes and connects - [ ] Light turns on when enabled - [ ] Bills are accepted and denomination detected correctly - [ ] Bills can be stacked (accepted) - [ ] Bills can be rejected (returned to customer) - [ ] Stacker full detection works - [ ] Stacker open detection works ### Bill Dispenser (F56 / Fujitsu) - [ ] Dispenser initializes with correct denominations - [ ] Single bill dispense works - [ ] Multi-bill dispense works - [ ] Bills present detection works - [ ] Error handling (jam, empty cassette) works ### Integration - [ ] Full cash-in flow: insert bills → pay Lightning → complete - [ ] Full cash-out flow: select amount → receive payment → dispense ## Hardware Details - **Device:** Lamassu Sintra (Gen 2, UP Board) - **Validator:** JCM iVIZION at `/dev/ttyJ5` - **Dispenser:** Fujitsu F56 at `/dev/ttyJ7` ## Notes Document any protocol differences or issues discovered during testing. ## References - [ADR-001](../docs/adr/001-hal-architecture.md) - Architecture decisions - `packages/hal/` - HAL implementation

padreug referenced this issue

2026-06-13 22:02:49 +00:00

LNBits as Nostr-native UI layer over Lightning.Pub #22

padreug referenced this issue

2026-09-29 21:56:08 +00:00

fix(hal): await the serial close, and stop reporting a cassette layout the dispenser refused #119