Add Castle documentation content

- Emergency procedures (fire, medical, weather, utilities)
- Equipment guides (tractor, heating, kitchen, tools)
- Getting started (house rules, FAQ, supplies)
- Infrastructure docs (electrical, water, internet, heating)
- Spaces overview (main building, outbuildings, outdoor)

content/equipment/farm-machinery/tractor/attachments/index.md

@@ -0,0 +1,67 @@
+---
+title: Tractor Attachments
+description: Guides for tractor implements and attachments
+aliases:
+  - attachments
+tags:
+  - equipment
+  - tractor
+  - attachments
+---
+
+# Tractor Attachments
+
+Implements and attachments for the [[tractor|farm tractor]].
+
+> [!warning] Attachment Safety
+> Always ensure the tractor is off and the PTO disengaged before attaching or detaching implements. Follow the connection procedure carefully.
+
+## Available Attachments
+
+### [[mower-attachment|Mower Attachment]]
+For cutting grass and maintaining paddocks.
+
+### [[vacuum-attachment|Vacuum / Collector Attachment]]
+For collecting leaves, grass clippings, and debris.
+
+## General Attachment Procedure
+
+### Connecting an Attachment
+
+1. Park tractor on level ground
+2. Turn off engine and remove key
+3. Lower 3-point hitch to lowest position
+4. Align attachment with hitch points
+5. Connect lower arms first, then top link
+6. Adjust top link length as needed
+7. Connect PTO shaft (if required)
+8. Connect hydraulic lines (if required)
+9. Raise attachment and check security
+
+### Disconnecting
+
+1. Lower attachment to ground
+2. Turn off engine and remove key
+3. Disconnect PTO shaft
+4. Disconnect hydraulic lines (relieve pressure first)
+5. Remove top link, then lower arms
+6. Drive tractor away slowly
+
+## PTO Operation
+
+> [!danger] PTO Hazard
+> PTO shafts spin at high speed and can cause fatal entanglement injuries. Never approach a spinning PTO. Always disengage and wait for complete stop.
+
+- Standard PTO speed: 540 RPM
+- Always use PTO guard/shield
+- Check attachment is rated for tractor PTO
+
+## Storage
+
+- Store attachments under cover when possible
+- Grease connection points before storage
+- Location: *TBD*
+
+## Related
+
+- [[tractor|Tractor Operation Guide]]

content/equipment/farm-machinery/tractor/attachments/mower-attachment/index.md

@@ -0,0 +1,102 @@
+---
+title: Mower Attachment
+description: Tractor mower attachment operation guide
+aliases:
+  - mower-attachment
+tags:
+  - equipment
+  - tractor
+  - mower
+  - attachments
+---
+
+# Mower Attachment
+
+*TBD: Add make and model*
+
+## Specifications
+
+| Spec | Value |
+|------|-------|
+| Make/Model | *TBD* |
+| Type | Flail / Rotary / Finishing |
+| Cutting width | *TBD* |
+| PTO speed | *TBD* |
+| Storage location | *TBD* |
+
+## Uses
+
+- Paddock maintenance
+- Grass cutting
+- Rough area clearing
+- Pasture topping
+
+## Pre-Use Checks
+
+1. Inspect blades/flails for damage or wear
+2. Check belt tension (if belt-driven)
+3. Check PTO shaft and guards
+4. Ensure all guards in place
+5. Check for debris in cutting chamber
+
+## Attachment Procedure
+
+See [[attachments|general attachment procedure]], plus:
+
+*TBD: Add specific connection instructions*
+
+## Operation
+
+1. Attach to tractor following procedure
+2. Set cutting height before starting
+3. Start tractor, engage PTO at low RPM
+4. Increase to operating RPM
+5. Lower mower to cutting position
+6. Drive at appropriate speed for conditions
+
+### Cutting Tips
+
+- Adjust speed based on grass density
+- Overlap passes slightly
+- Avoid scalping on uneven ground
+- Raise mower when turning
+- Stop PTO before reversing
+
+> [!warning] Hidden Hazards
+> Walk the area first to check for rocks, stumps, wire, or other hazards that could damage the mower or become projectiles.
+
+## After Use
+
+1. Disengage PTO and turn off tractor
+2. Lower mower to ground
+3. Remove debris from cutting deck
+4. Inspect blades for damage
+5. Grease fittings if required
+
+## Maintenance
+
+| Task | Frequency |
+|------|-----------|
+| Inspect blades | Before each use |
+| Clear debris from deck | After each use |
+| Check belt tension | Weekly |
+| Sharpen/replace blades | As needed |
+| Grease fittings | As per manual |
+
+## Troubleshooting
+
+| Problem | Possible Cause | Solution |
+|---------|----------------|----------|
+| Uneven cut | Blades dull or damaged | Sharpen or replace |
+| | Deck not level | Adjust deck height |
+| Excessive vibration | Blade out of balance | Replace blade |
+| | Debris wrapped on spindle | Clear debris |
+| Won't engage | PTO issue | Check PTO connection |
+| | Belt broken/slipping | Replace/tension belt |
+
+## Storage
+
+- Clean thoroughly before storage
+- Store under cover
+- Check for rust/corrosion periodically
+- Location: *TBD*

content/equipment/farm-machinery/tractor/attachments/vacuum-attachment/index.md

@@ -0,0 +1,121 @@
+---
+title: Vacuum / Collector Attachment
+description: Tractor vacuum and debris collector operation guide
+aliases:
+  - vacuum-attachment
+tags:
+  - equipment
+  - tractor
+  - vacuum
+  - attachments
+---
+
+# Vacuum / Collector Attachment
+
+*TBD: Add make and model*
+
+## Specifications
+
+| Spec | Value |
+|------|-------|
+| Make/Model | *TBD* |
+| Type | Tow-behind / Mounted |
+| Hopper capacity | *TBD* |
+| PTO speed | *TBD* |
+| Storage location | *TBD* |
+
+## Uses
+
+- Collecting grass clippings after mowing
+- Leaf collection in autumn
+- Light debris cleanup
+- Paddock cleanup
+
+## Pre-Use Checks
+
+1. Empty hopper if not already empty
+2. Check hopper bag/screen for tears
+3. Inspect intake hose/chute for blockages
+4. Check fan/impeller (if accessible)
+5. Check PTO shaft and guards
+6. Ensure all guards in place
+
+## Attachment Procedure
+
+See [[attachments|general attachment procedure]], plus:
+
+*TBD: Add specific connection instructions*
+
+## Operation
+
+1. Attach to tractor following procedure
+2. Start tractor, engage PTO
+3. Drive slowly over material to collect
+4. Monitor hopper fill level
+5. Empty when full (don't overfill)
+
+### Operating Tips
+
+- Best results on dry material
+- Wet grass/leaves will clog - avoid if possible
+- Make overlapping passes
+- Slow down for heavy debris
+- Stop immediately if unusual noise/vibration
+
+> [!tip] Efficient Collection
+> For best results, mow first with the [[mower-attachment|mower]] then follow up with the vacuum in a separate pass.
+
+## Emptying the Hopper
+
+*TBD: Add specific emptying procedure*
+
+General steps:
+1. Disengage PTO
+2. Position over dump area
+3. Release hopper / raise to empty
+4. Check hopper is fully empty
+5. Close/lower hopper securely
+
+### Disposal
+
+- Grass clippings: Compost area at *TBD*
+- Leaves: Compost or leaf mould pile at *TBD*
+- Mixed debris: *TBD*
+
+## After Use
+
+1. Empty hopper completely
+2. Disengage PTO and turn off tractor
+3. Clear any debris from intake
+4. Check for damage or wear
+5. Clean exterior if needed
+
+## Maintenance
+
+| Task | Frequency |
+|------|-----------|
+| Empty hopper | After each use |
+| Check intake for blockages | After each use |
+| Inspect bag/screen | Weekly during use |
+| Check belts (if equipped) | Monthly |
+| Grease fittings | As per manual |
+
+## Troubleshooting
+
+| Problem | Possible Cause | Solution |
+|---------|----------------|----------|
+| Poor suction | Blockage in intake | Clear obstruction |
+| | Hopper full | Empty hopper |
+| | Bag/screen clogged | Clean or replace |
+| | Fan damaged | Inspect and repair |
+| Won't pick up material | Material too wet | Wait for dry conditions |
+| | Driving too fast | Slow down |
+| Excessive noise | Foreign object in fan | Stop, inspect, remove |
+| | Worn bearings | Service required |
+
+## Storage
+
+- Empty and clean before storage
+- Store under cover
+- Check for mouse/pest nests before first use of season
+- Location: *TBD*

content/equipment/farm-machinery/tractor/index.md

@@ -0,0 +1,204 @@
+---
+title: Tractor
+description: Operating guide for the farm tractor
+aliases:
+  - tractor
+tags:
+  - equipment
+  - machinery
+  - farm
+  - tractor
+---
+
+# Tractor
+
+Iseki TXG23FH compact tractor (Type GVRLE4 - 4WD with front hitch).
+
+> [!danger] Training Required
+> The tractor requires proper training before operation. Contact *TBD* for training.
+
+## Specifications
+
+| Spec | Value |
+|------|-------|
+| Make/Model | Iseki TXG23FH |
+| Type | GVRLE4 (4WD, Europe) |
+| Serial No | 004228 |
+| Engine | E3112-B12 diesel, 1123cc, 3-cylinder |
+| Engine No | 271812 |
+| Power | 22.5 HP (16.5 kW) @ 2600 rpm |
+| Transmission | HST (Hydrostatic), 2-speed range |
+| Drive | 4WD |
+| Fuel type | Diesel |
+| Fuel tank | 21 litres |
+| Total mass | 1300 kg max |
+| Towing capacity | 1000 kg (unbraked/inertia-braked) |
+| PTO (rear) | 540 rpm @ 2532 engine rpm |
+| PTO (mid) | 2000 rpm @ 2476 engine rpm |
+| 3-point hitch | Front and rear, Category 1, 540 kg lift |
+| Location | *TBD* |
+
+See [full operation manual (PDF)](/equipment/farm-machinery/tractor/manuals/OM-TXG23-0805-01-250.pdf) for complete specifications.
+
+### Identification Plates
+
+![[model-type-plaque.png|400]]
+![[model-and-weight-limits.png|400]]
+
+## Required PPE
+
+- Steel-capped boots
+- Hearing protection (if enclosed cab not available)
+- High-vis vest (when working near roads)
+
+## Pre-Operation Checks
+
+1. Walk around inspection - check for leaks, damage, obstructions
+2. Check fuel level
+3. Check engine oil level
+4. Check hydraulic fluid level
+5. Check tyre pressure and condition
+6. Ensure all guards and safety shields are in place
+7. Adjust seat and mirrors
+
+## Starting Procedure
+
+1. Sit in the operator's seat (seat safety switch must be activated)
+2. Ensure PTO is disengaged (PTO lever in OFF position)
+3. Ensure HST pedal is in neutral position
+4. Ensure range lever is in neutral (N)
+5. Apply parking brake
+6. Turn key to ON position - wait for glow plug indicator (cold starts) - see [[power-on-from-cold.png|photo]]
+7. Turn key to START position - see [[power-on-from-cold.png|photo]]
+8. Release key when engine starts
+9. Allow to warm up 2-3 minutes before heavy work
+
+> [!warning] Safety Interlocks
+> The tractor will not start unless: seat is occupied, PTO is off, and transmission is in neutral. If the engine won't crank, check these first.
+
+## Operating Basics
+
+### Controls
+
+Key controls (numbers refer to diagram below):
+- **(2) Parking brake lock lever** - Locks parking brake
+- **(4) Range shift lever** - High (H), Low (L), or Neutral (N) - see [[range-shift-lever-and-three-point-hitch.png|photo]]
+- **(5) Rear PTO selector lever** - Engages rear PTO (540 rpm) - see [[pto-levers.png|photo]]
+- **(6) Hand throttle lever** - Engine speed control
+- **(7) Brake pedal** - Service brakes
+- **(8) HST pedal** - Forward/reverse speed control (hydro forward/reverse)
+- **(9) Differential lock pedal** - Locks rear wheels together (for traction)
+- **(10) 3-point hitch position lever** - Raise/lower rear implements - see [[range-shift-lever-and-three-point-hitch.png|photo]]
+- **(11) Mid PTO selector lever** - Engages mid PTO (2000 rpm) - see [[pto-levers.png|photo]]
+- **(12) PTO clutch lever** - PTO on/off - see [[pto-levers.png|photo]]
+- **(13) 4WD shift lever** - Engages front wheel drive
+- **(14) Cutting height control knob** - Adjusts mid-mount mower height
+
+![[instruments-and-controls.png]]
+
+See [operation manual](/equipment/farm-machinery/tractor/manuals/OM-TXG23-0805-01-250.pdf) for full control layout.
+
+### Driving
+
+- Always look behind before reversing
+- Use low gear on slopes
+- Never turn sharply at speed
+- Keep loader/implements low when travelling
+
+### Slopes and Hills
+
+> [!warning] Rollover Risk
+> Tractors can roll over on slopes. Always drive up/down slopes, never across. Reduce speed on uneven ground.
+
+- Maximum safe slope angle: 15° (avoid steeper slopes)
+- Always face uphill when parking
+- Use low range and engine braking when descending
+- Engage 4WD on slopes for better traction
+
+## Attachments
+
+See [[attachments|Tractor Attachments]] for detailed guides on each implement.
+
+| Attachment | Purpose |
+|------------|---------|
+| [[mower-attachment|Mower]] | Cutting grass and paddock maintenance |
+| [[vacuum-attachment|Vacuum / Collector]] | Collecting leaves, clippings, debris |
+
+### Attaching Implements
+
+See the [[attachments|attachments guide]] for the full procedure. Key points:
+
+1. Park on level ground, engine off, key removed
+2. Lower 3-point hitch fully
+3. Connect lower arms first, then top link
+4. Connect PTO shaft (ensure it clicks in)
+5. Connect hydraulics if needed
+6. Raise and check security before starting
+
+## Shutdown Procedure
+
+1. Lower all implements to the ground
+2. Disengage PTO
+3. Set parking brake
+4. Allow engine to idle for 1-2 minutes
+5. Turn off ignition
+6. Remove key
+
+## Refuelling
+
+- Fuel type: Diesel only
+- Tank capacity: 21 litres
+- Fuel storage location: *TBD*
+- Never refuel while engine is running or hot
+
+## Maintenance
+
+### Fluid Capacities
+
+| Fluid | Capacity | Type |
+|-------|----------|------|
+| Engine oil | 2.6 L | API CD or higher, SAE 10W-30 |
+| Transmission/hydraulic | 11 L | UTF (Universal Tractor Fluid) |
+| Coolant | 4.6 L | 50/50 antifreeze mix |
+| Front axle | 4.0 L | SAE 80W-90 gear oil |
+
+### Service Schedule
+
+| Interval | Tasks |
+|----------|-------|
+| Daily | Check engine oil, coolant, hydraulic fluid levels |
+| 50 hours | Change engine oil and filter |
+| 100 hours | Check/clean air filter, check battery |
+| 200 hours | Change hydraulic/transmission fluid filter |
+| 300 hours | Change transmission fluid, check valve clearance |
+| 600 hours | Change front axle oil, flush coolant |
+
+Service contact: *TBD*
+
+## Troubleshooting
+
+| Problem | Possible Cause | Solution |
+|---------|----------------|----------|
+| Won't crank | Seat switch not activated | Sit firmly in seat |
+| | PTO engaged | Disengage PTO |
+| | Not in neutral | Put range lever in N |
+| | Battery flat | Charge or jump start |
+| Cranks but won't start | No fuel | Check fuel level |
+| | Air in fuel system | Bleed fuel system |
+| | Glow plugs faulty | Check/replace glow plugs |
+| Poor power | Clogged air filter | Clean or replace |
+| | Fuel filter blocked | Replace fuel filter |
+| Engine overheats | Low coolant | Top up coolant |
+| | Radiator blocked | Clean radiator fins |
+
+## Emergency Procedures
+
+- **Fire**: Shut off engine, evacuate, call emergency services
+- **Rollover**: Brace yourself, do NOT jump off - stay inside
+- **Stuck**: Do not spin wheels excessively; get assistance
+
+## Contact
+
+- Training requests: *TBD*
+- Maintenance issues: *TBD*
+- Manual: [Operation Manual (PDF)](/equipment/farm-machinery/tractor/manuals/OM-TXG23-0805-01-250.pdf)