Add Castle documentation content
- Emergency procedures (fire, medical, weather, utilities) - Equipment guides (tractor, heating, kitchen, tools) - Getting started (house rules, FAQ, supplies) - Infrastructure docs (electrical, water, internet, heating) - Spaces overview (main building, outbuildings, outdoor)
This commit is contained in:
Patrick Mulligan
parent
222b641084
commit
3d8425e14f
65 changed files with 3836 additions and 0 deletions
|
|
@ -0,0 +1,67 @@
|
|||
---
|
||||
title: Tractor Attachments
|
||||
description: Guides for tractor implements and attachments
|
||||
aliases:
|
||||
- attachments
|
||||
tags:
|
||||
- equipment
|
||||
- tractor
|
||||
- attachments
|
||||
---
|
||||
|
||||
# Tractor Attachments
|
||||
|
||||
Implements and attachments for the [[tractor|farm tractor]].
|
||||
|
||||
> [!warning] Attachment Safety
|
||||
> Always ensure the tractor is off and the PTO disengaged before attaching or detaching implements. Follow the connection procedure carefully.
|
||||
|
||||
## Available Attachments
|
||||
|
||||
### [[mower-attachment|Mower Attachment]]
|
||||
For cutting grass and maintaining paddocks.
|
||||
|
||||
### [[vacuum-attachment|Vacuum / Collector Attachment]]
|
||||
For collecting leaves, grass clippings, and debris.
|
||||
|
||||
## General Attachment Procedure
|
||||
|
||||
### Connecting an Attachment
|
||||
|
||||
1. Park tractor on level ground
|
||||
2. Turn off engine and remove key
|
||||
3. Lower 3-point hitch to lowest position
|
||||
4. Align attachment with hitch points
|
||||
5. Connect lower arms first, then top link
|
||||
6. Adjust top link length as needed
|
||||
7. Connect PTO shaft (if required)
|
||||
8. Connect hydraulic lines (if required)
|
||||
9. Raise attachment and check security
|
||||
|
||||
### Disconnecting
|
||||
|
||||
1. Lower attachment to ground
|
||||
2. Turn off engine and remove key
|
||||
3. Disconnect PTO shaft
|
||||
4. Disconnect hydraulic lines (relieve pressure first)
|
||||
5. Remove top link, then lower arms
|
||||
6. Drive tractor away slowly
|
||||
|
||||
## PTO Operation
|
||||
|
||||
> [!danger] PTO Hazard
|
||||
> PTO shafts spin at high speed and can cause fatal entanglement injuries. Never approach a spinning PTO. Always disengage and wait for complete stop.
|
||||
|
||||
- Standard PTO speed: 540 RPM
|
||||
- Always use PTO guard/shield
|
||||
- Check attachment is rated for tractor PTO
|
||||
|
||||
## Storage
|
||||
|
||||
- Store attachments under cover when possible
|
||||
- Grease connection points before storage
|
||||
- Location: *TBD*
|
||||
|
||||
## Related
|
||||
|
||||
- [[tractor|Tractor Operation Guide]]
|
||||
|
|
@ -0,0 +1,102 @@
|
|||
---
|
||||
title: Mower Attachment
|
||||
description: Tractor mower attachment operation guide
|
||||
aliases:
|
||||
- mower-attachment
|
||||
tags:
|
||||
- equipment
|
||||
- tractor
|
||||
- mower
|
||||
- attachments
|
||||
---
|
||||
|
||||
# Mower Attachment
|
||||
|
||||
*TBD: Add make and model*
|
||||
|
||||
## Specifications
|
||||
|
||||
| Spec | Value |
|
||||
|------|-------|
|
||||
| Make/Model | *TBD* |
|
||||
| Type | Flail / Rotary / Finishing |
|
||||
| Cutting width | *TBD* |
|
||||
| PTO speed | *TBD* |
|
||||
| Storage location | *TBD* |
|
||||
|
||||
## Uses
|
||||
|
||||
- Paddock maintenance
|
||||
- Grass cutting
|
||||
- Rough area clearing
|
||||
- Pasture topping
|
||||
|
||||
## Pre-Use Checks
|
||||
|
||||
1. Inspect blades/flails for damage or wear
|
||||
2. Check belt tension (if belt-driven)
|
||||
3. Check PTO shaft and guards
|
||||
4. Ensure all guards in place
|
||||
5. Check for debris in cutting chamber
|
||||
|
||||
## Attachment Procedure
|
||||
|
||||
See [[attachments|general attachment procedure]], plus:
|
||||
|
||||
*TBD: Add specific connection instructions*
|
||||
|
||||
## Operation
|
||||
|
||||
1. Attach to tractor following procedure
|
||||
2. Set cutting height before starting
|
||||
3. Start tractor, engage PTO at low RPM
|
||||
4. Increase to operating RPM
|
||||
5. Lower mower to cutting position
|
||||
6. Drive at appropriate speed for conditions
|
||||
|
||||
### Cutting Tips
|
||||
|
||||
- Adjust speed based on grass density
|
||||
- Overlap passes slightly
|
||||
- Avoid scalping on uneven ground
|
||||
- Raise mower when turning
|
||||
- Stop PTO before reversing
|
||||
|
||||
> [!warning] Hidden Hazards
|
||||
> Walk the area first to check for rocks, stumps, wire, or other hazards that could damage the mower or become projectiles.
|
||||
|
||||
## After Use
|
||||
|
||||
1. Disengage PTO and turn off tractor
|
||||
2. Lower mower to ground
|
||||
3. Remove debris from cutting deck
|
||||
4. Inspect blades for damage
|
||||
5. Grease fittings if required
|
||||
|
||||
## Maintenance
|
||||
|
||||
| Task | Frequency |
|
||||
|------|-----------|
|
||||
| Inspect blades | Before each use |
|
||||
| Clear debris from deck | After each use |
|
||||
| Check belt tension | Weekly |
|
||||
| Sharpen/replace blades | As needed |
|
||||
| Grease fittings | As per manual |
|
||||
|
||||
## Troubleshooting
|
||||
|
||||
| Problem | Possible Cause | Solution |
|
||||
|---------|----------------|----------|
|
||||
| Uneven cut | Blades dull or damaged | Sharpen or replace |
|
||||
| | Deck not level | Adjust deck height |
|
||||
| Excessive vibration | Blade out of balance | Replace blade |
|
||||
| | Debris wrapped on spindle | Clear debris |
|
||||
| Won't engage | PTO issue | Check PTO connection |
|
||||
| | Belt broken/slipping | Replace/tension belt |
|
||||
|
||||
## Storage
|
||||
|
||||
- Clean thoroughly before storage
|
||||
- Store under cover
|
||||
- Check for rust/corrosion periodically
|
||||
- Location: *TBD*
|
||||
|
|
@ -0,0 +1,121 @@
|
|||
---
|
||||
title: Vacuum / Collector Attachment
|
||||
description: Tractor vacuum and debris collector operation guide
|
||||
aliases:
|
||||
- vacuum-attachment
|
||||
tags:
|
||||
- equipment
|
||||
- tractor
|
||||
- vacuum
|
||||
- attachments
|
||||
---
|
||||
|
||||
# Vacuum / Collector Attachment
|
||||
|
||||
*TBD: Add make and model*
|
||||
|
||||
## Specifications
|
||||
|
||||
| Spec | Value |
|
||||
|------|-------|
|
||||
| Make/Model | *TBD* |
|
||||
| Type | Tow-behind / Mounted |
|
||||
| Hopper capacity | *TBD* |
|
||||
| PTO speed | *TBD* |
|
||||
| Storage location | *TBD* |
|
||||
|
||||
## Uses
|
||||
|
||||
- Collecting grass clippings after mowing
|
||||
- Leaf collection in autumn
|
||||
- Light debris cleanup
|
||||
- Paddock cleanup
|
||||
|
||||
## Pre-Use Checks
|
||||
|
||||
1. Empty hopper if not already empty
|
||||
2. Check hopper bag/screen for tears
|
||||
3. Inspect intake hose/chute for blockages
|
||||
4. Check fan/impeller (if accessible)
|
||||
5. Check PTO shaft and guards
|
||||
6. Ensure all guards in place
|
||||
|
||||
## Attachment Procedure
|
||||
|
||||
See [[attachments|general attachment procedure]], plus:
|
||||
|
||||
*TBD: Add specific connection instructions*
|
||||
|
||||
## Operation
|
||||
|
||||
1. Attach to tractor following procedure
|
||||
2. Start tractor, engage PTO
|
||||
3. Drive slowly over material to collect
|
||||
4. Monitor hopper fill level
|
||||
5. Empty when full (don't overfill)
|
||||
|
||||
### Operating Tips
|
||||
|
||||
- Best results on dry material
|
||||
- Wet grass/leaves will clog - avoid if possible
|
||||
- Make overlapping passes
|
||||
- Slow down for heavy debris
|
||||
- Stop immediately if unusual noise/vibration
|
||||
|
||||
> [!tip] Efficient Collection
|
||||
> For best results, mow first with the [[mower-attachment|mower]] then follow up with the vacuum in a separate pass.
|
||||
|
||||
## Emptying the Hopper
|
||||
|
||||
*TBD: Add specific emptying procedure*
|
||||
|
||||
General steps:
|
||||
1. Disengage PTO
|
||||
2. Position over dump area
|
||||
3. Release hopper / raise to empty
|
||||
4. Check hopper is fully empty
|
||||
5. Close/lower hopper securely
|
||||
|
||||
### Disposal
|
||||
|
||||
- Grass clippings: Compost area at *TBD*
|
||||
- Leaves: Compost or leaf mould pile at *TBD*
|
||||
- Mixed debris: *TBD*
|
||||
|
||||
## After Use
|
||||
|
||||
1. Empty hopper completely
|
||||
2. Disengage PTO and turn off tractor
|
||||
3. Clear any debris from intake
|
||||
4. Check for damage or wear
|
||||
5. Clean exterior if needed
|
||||
|
||||
## Maintenance
|
||||
|
||||
| Task | Frequency |
|
||||
|------|-----------|
|
||||
| Empty hopper | After each use |
|
||||
| Check intake for blockages | After each use |
|
||||
| Inspect bag/screen | Weekly during use |
|
||||
| Check belts (if equipped) | Monthly |
|
||||
| Grease fittings | As per manual |
|
||||
|
||||
## Troubleshooting
|
||||
|
||||
| Problem | Possible Cause | Solution |
|
||||
|---------|----------------|----------|
|
||||
| Poor suction | Blockage in intake | Clear obstruction |
|
||||
| | Hopper full | Empty hopper |
|
||||
| | Bag/screen clogged | Clean or replace |
|
||||
| | Fan damaged | Inspect and repair |
|
||||
| Won't pick up material | Material too wet | Wait for dry conditions |
|
||||
| | Driving too fast | Slow down |
|
||||
| Excessive noise | Foreign object in fan | Stop, inspect, remove |
|
||||
| | Worn bearings | Service required |
|
||||
|
||||
## Storage
|
||||
|
||||
- Empty and clean before storage
|
||||
- Store under cover
|
||||
- Check for mouse/pest nests before first use of season
|
||||
- Location: *TBD*
|
||||
Loading…
Add table
Add a link
Reference in a new issue