Add Castle documentation content

- Emergency procedures (fire, medical, weather, utilities)
- Equipment guides (tractor, heating, kitchen, tools)
- Getting started (house rules, FAQ, supplies)
- Infrastructure docs (electrical, water, internet, heating)
- Spaces overview (main building, outbuildings, outdoor)

content/equipment/farm-machinery/tractor/attachments/mower-attachment/index.md

@@ -0,0 +1,102 @@
+---
+title: Mower Attachment
+description: Tractor mower attachment operation guide
+aliases:
+  - mower-attachment
+tags:
+  - equipment
+  - tractor
+  - mower
+  - attachments
+---
+
+# Mower Attachment
+
+*TBD: Add make and model*
+
+## Specifications
+
+| Spec | Value |
+|------|-------|
+| Make/Model | *TBD* |
+| Type | Flail / Rotary / Finishing |
+| Cutting width | *TBD* |
+| PTO speed | *TBD* |
+| Storage location | *TBD* |
+
+## Uses
+
+- Paddock maintenance
+- Grass cutting
+- Rough area clearing
+- Pasture topping
+
+## Pre-Use Checks
+
+1. Inspect blades/flails for damage or wear
+2. Check belt tension (if belt-driven)
+3. Check PTO shaft and guards
+4. Ensure all guards in place
+5. Check for debris in cutting chamber
+
+## Attachment Procedure
+
+See [[attachments|general attachment procedure]], plus:
+
+*TBD: Add specific connection instructions*
+
+## Operation
+
+1. Attach to tractor following procedure
+2. Set cutting height before starting
+3. Start tractor, engage PTO at low RPM
+4. Increase to operating RPM
+5. Lower mower to cutting position
+6. Drive at appropriate speed for conditions
+
+### Cutting Tips
+
+- Adjust speed based on grass density
+- Overlap passes slightly
+- Avoid scalping on uneven ground
+- Raise mower when turning
+- Stop PTO before reversing
+
+> [!warning] Hidden Hazards
+> Walk the area first to check for rocks, stumps, wire, or other hazards that could damage the mower or become projectiles.
+
+## After Use
+
+1. Disengage PTO and turn off tractor
+2. Lower mower to ground
+3. Remove debris from cutting deck
+4. Inspect blades for damage
+5. Grease fittings if required
+
+## Maintenance
+
+| Task | Frequency |
+|------|-----------|
+| Inspect blades | Before each use |
+| Clear debris from deck | After each use |
+| Check belt tension | Weekly |
+| Sharpen/replace blades | As needed |
+| Grease fittings | As per manual |
+
+## Troubleshooting
+
+| Problem | Possible Cause | Solution |
+|---------|----------------|----------|
+| Uneven cut | Blades dull or damaged | Sharpen or replace |
+| | Deck not level | Adjust deck height |
+| Excessive vibration | Blade out of balance | Replace blade |
+| | Debris wrapped on spindle | Clear debris |
+| Won't engage | PTO issue | Check PTO connection |
+| | Belt broken/slipping | Replace/tension belt |
+
+## Storage
+
+- Clean thoroughly before storage
+- Store under cover
+- Check for rust/corrosion periodically
+- Location: *TBD*