Add Castle documentation content

- Emergency procedures (fire, medical, weather, utilities)
- Equipment guides (tractor, heating, kitchen, tools)
- Getting started (house rules, FAQ, supplies)
- Infrastructure docs (electrical, water, internet, heating)
- Spaces overview (main building, outbuildings, outdoor)

content/equipment/farm-machinery/tractor/attachments/vacuum-attachment/index.md

@@ -0,0 +1,121 @@
+---
+title: Vacuum / Collector Attachment
+description: Tractor vacuum and debris collector operation guide
+aliases:
+  - vacuum-attachment
+tags:
+  - equipment
+  - tractor
+  - vacuum
+  - attachments
+---
+
+# Vacuum / Collector Attachment
+
+*TBD: Add make and model*
+
+## Specifications
+
+| Spec | Value |
+|------|-------|
+| Make/Model | *TBD* |
+| Type | Tow-behind / Mounted |
+| Hopper capacity | *TBD* |
+| PTO speed | *TBD* |
+| Storage location | *TBD* |
+
+## Uses
+
+- Collecting grass clippings after mowing
+- Leaf collection in autumn
+- Light debris cleanup
+- Paddock cleanup
+
+## Pre-Use Checks
+
+1. Empty hopper if not already empty
+2. Check hopper bag/screen for tears
+3. Inspect intake hose/chute for blockages
+4. Check fan/impeller (if accessible)
+5. Check PTO shaft and guards
+6. Ensure all guards in place
+
+## Attachment Procedure
+
+See [[attachments|general attachment procedure]], plus:
+
+*TBD: Add specific connection instructions*
+
+## Operation
+
+1. Attach to tractor following procedure
+2. Start tractor, engage PTO
+3. Drive slowly over material to collect
+4. Monitor hopper fill level
+5. Empty when full (don't overfill)
+
+### Operating Tips
+
+- Best results on dry material
+- Wet grass/leaves will clog - avoid if possible
+- Make overlapping passes
+- Slow down for heavy debris
+- Stop immediately if unusual noise/vibration
+
+> [!tip] Efficient Collection
+> For best results, mow first with the [[mower-attachment|mower]] then follow up with the vacuum in a separate pass.
+
+## Emptying the Hopper
+
+*TBD: Add specific emptying procedure*
+
+General steps:
+1. Disengage PTO
+2. Position over dump area
+3. Release hopper / raise to empty
+4. Check hopper is fully empty
+5. Close/lower hopper securely
+
+### Disposal
+
+- Grass clippings: Compost area at *TBD*
+- Leaves: Compost or leaf mould pile at *TBD*
+- Mixed debris: *TBD*
+
+## After Use
+
+1. Empty hopper completely
+2. Disengage PTO and turn off tractor
+3. Clear any debris from intake
+4. Check for damage or wear
+5. Clean exterior if needed
+
+## Maintenance
+
+| Task | Frequency |
+|------|-----------|
+| Empty hopper | After each use |
+| Check intake for blockages | After each use |
+| Inspect bag/screen | Weekly during use |
+| Check belts (if equipped) | Monthly |
+| Grease fittings | As per manual |
+
+## Troubleshooting
+
+| Problem | Possible Cause | Solution |
+|---------|----------------|----------|
+| Poor suction | Blockage in intake | Clear obstruction |
+| | Hopper full | Empty hopper |
+| | Bag/screen clogged | Clean or replace |
+| | Fan damaged | Inspect and repair |
+| Won't pick up material | Material too wet | Wait for dry conditions |
+| | Driving too fast | Slow down |
+| Excessive noise | Foreign object in fan | Stop, inspect, remove |
+| | Worn bearings | Service required |
+
+## Storage
+
+- Empty and clean before storage
+- Store under cover
+- Check for mouse/pest nests before first use of season
+- Location: *TBD*