padreug/castle-docs
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
castle-docs/content/equipment/farm-machinery/tractor/attachments/vacuum-attachment/index.md
Patrick Mulligan 3d8425e14f Add Castle documentation content 
- Emergency procedures (fire, medical, weather, utilities)
- Equipment guides (tractor, heating, kitchen, tools)
- Getting started (house rules, FAQ, supplies)
- Infrastructure docs (electrical, water, internet, heating)
- Spaces overview (main building, outbuildings, outdoor)
2026-01-01 11:29:51 +01:00

2.8 KiB
Raw Permalink Blame History

title description aliases tags
Vacuum / Collector Attachment Tractor vacuum and debris collector operation guide
vacuum-attachment
equipment
tractor
vacuum
attachments

Vacuum / Collector Attachment

TBD: Add make and model

Specifications

Spec Value
Make/Model TBD
Type Tow-behind / Mounted
Hopper capacity TBD
PTO speed TBD
Storage location TBD

Uses

  • Collecting grass clippings after mowing
  • Leaf collection in autumn
  • Light debris cleanup
  • Paddock cleanup

Pre-Use Checks

  1. Empty hopper if not already empty
  2. Check hopper bag/screen for tears
  3. Inspect intake hose/chute for blockages
  4. Check fan/impeller (if accessible)
  5. Check PTO shaft and guards
  6. Ensure all guards in place

Attachment Procedure

See attachments, plus:

TBD: Add specific connection instructions

Operation

  1. Attach to tractor following procedure
  2. Start tractor, engage PTO
  3. Drive slowly over material to collect
  4. Monitor hopper fill level
  5. Empty when full (don't overfill)

Operating Tips

  • Best results on dry material
  • Wet grass/leaves will clog - avoid if possible
  • Make overlapping passes
  • Slow down for heavy debris
  • Stop immediately if unusual noise/vibration

[!tip] Efficient Collection For best results, mow first with the mower-attachment then follow up with the vacuum in a separate pass.

Emptying the Hopper

TBD: Add specific emptying procedure

General steps:

  1. Disengage PTO
  2. Position over dump area
  3. Release hopper / raise to empty
  4. Check hopper is fully empty
  5. Close/lower hopper securely

Disposal

  • Grass clippings: Compost area at TBD
  • Leaves: Compost or leaf mould pile at TBD
  • Mixed debris: TBD

After Use

  1. Empty hopper completely
  2. Disengage PTO and turn off tractor
  3. Clear any debris from intake
  4. Check for damage or wear
  5. Clean exterior if needed

Maintenance

Task Frequency
Empty hopper After each use
Check intake for blockages After each use
Inspect bag/screen Weekly during use
Check belts (if equipped) Monthly
Grease fittings As per manual

Troubleshooting

Problem Possible Cause Solution
Poor suction Blockage in intake Clear obstruction
Hopper full Empty hopper
Bag/screen clogged Clean or replace
Fan damaged Inspect and repair
Won't pick up material Material too wet Wait for dry conditions
Driving too fast Slow down
Excessive noise Foreign object in fan Stop, inspect, remove
Worn bearings Service required

Storage

  • Empty and clean before storage
  • Store under cover
  • Check for mouse/pest nests before first use of season
  • Location: TBD