castle-docs/content/equipment/farm-machinery/tractor/index.md

title	description	aliases	tags
Tractor	Operating guide for the farm tractor	tractor	equipment machinery farm tractor

Tractor

Iseki TXG23FH compact tractor (Type GVRLE4 - 4WD with front hitch).

[!danger] Training Required The tractor requires proper training before operation. Contact TBD for training.

Specifications

Spec	Value
Make/Model	Iseki TXG23FH
Type	GVRLE4 (4WD, Europe)
Serial No	004228
Engine	E3112-B12 diesel, 1123cc, 3-cylinder
Engine No	271812
Power	22.5 HP (16.5 kW) @ 2600 rpm
Transmission	HST (Hydrostatic), 2-speed range
Drive	4WD
Fuel type	Diesel
Fuel tank	21 litres
Total mass	1300 kg max
Towing capacity	1000 kg (unbraked/inertia-braked)
PTO (rear)	540 rpm @ 2532 engine rpm
PTO (mid)	2000 rpm @ 2476 engine rpm
3-point hitch	Front and rear, Category 1, 540 kg lift
Location	TBD

See full operation manual (PDF) for complete specifications.

Identification Plates

!model-type-plaque.png !model-and-weight-limits.png

Required PPE

• Steel-capped boots
• Hearing protection (if enclosed cab not available)
• High-vis vest (when working near roads)

Pre-Operation Checks

1. Walk around inspection - check for leaks, damage, obstructions
2. Check fuel level
3. Check engine oil level
4. Check hydraulic fluid level
5. Check tyre pressure and condition
6. Ensure all guards and safety shields are in place
7. Adjust seat and mirrors

Starting Procedure

1. Sit in the operator's seat (seat safety switch must be activated)
2. Ensure PTO is disengaged (PTO lever in OFF position)
3. Ensure HST pedal is in neutral position
4. Ensure range lever is in neutral (N)
5. Apply parking brake
6. Turn key to ON position - wait for glow plug indicator (cold starts) - see power-on-from-cold.png
7. Turn key to START position - see power-on-from-cold.png
8. Release key when engine starts
9. Allow to warm up 2-3 minutes before heavy work

[!warning] Safety Interlocks The tractor will not start unless: seat is occupied, PTO is off, and transmission is in neutral. If the engine won't crank, check these first.

Operating Basics

Controls

Key controls (numbers refer to diagram below):

• (2) Parking brake lock lever - Locks parking brake
• (4) Range shift lever - High (H), Low (L), or Neutral (N) - see range-shift-lever-and-three-point-hitch.png
• (5) Rear PTO selector lever - Engages rear PTO (540 rpm) - see pto-levers.png
• (6) Hand throttle lever - Engine speed control
• (7) Brake pedal - Service brakes
• (8) HST pedal - Forward/reverse speed control (hydro forward/reverse)
• (9) Differential lock pedal - Locks rear wheels together (for traction)
• (10) 3-point hitch position lever - Raise/lower rear implements - see range-shift-lever-and-three-point-hitch.png
• (11) Mid PTO selector lever - Engages mid PTO (2000 rpm) - see pto-levers.png
• (12) PTO clutch lever - PTO on/off - see pto-levers.png
• (13) 4WD shift lever - Engages front wheel drive
• (14) Cutting height control knob - Adjusts mid-mount mower height

!

See operation manual for full control layout.

Driving

• Always look behind before reversing
• Use low gear on slopes
• Never turn sharply at speed
• Keep loader/implements low when travelling

Slopes and Hills

[!warning] Rollover Risk Tractors can roll over on slopes. Always drive up/down slopes, never across. Reduce speed on uneven ground.

• Maximum safe slope angle: 15° (avoid steeper slopes)
• Always face uphill when parking
• Use low range and engine braking when descending
• Engage 4WD on slopes for better traction

Attachments

See attachments for detailed guides on each implement.

Attachment	Purpose
[[mower-attachment	Mower]]
[[vacuum-attachment	Vacuum / Collector]]

Attaching Implements

See the attachments for the full procedure. Key points:

1. Park on level ground, engine off, key removed
2. Lower 3-point hitch fully
3. Connect lower arms first, then top link
4. Connect PTO shaft (ensure it clicks in)
5. Connect hydraulics if needed
6. Raise and check security before starting

Shutdown Procedure

1. Lower all implements to the ground
2. Disengage PTO
3. Set parking brake
4. Allow engine to idle for 1-2 minutes
5. Turn off ignition
6. Remove key

Refuelling

• Fuel type: Diesel only
• Tank capacity: 21 litres
• Fuel storage location: TBD
• Never refuel while engine is running or hot

Maintenance

Fluid Capacities

Fluid	Capacity	Type
Engine oil	2.6 L	API CD or higher, SAE 10W-30
Transmission/hydraulic	11 L	UTF (Universal Tractor Fluid)
Coolant	4.6 L	50/50 antifreeze mix
Front axle	4.0 L	SAE 80W-90 gear oil

Service Schedule

Interval	Tasks
Daily	Check engine oil, coolant, hydraulic fluid levels
50 hours	Change engine oil and filter
100 hours	Check/clean air filter, check battery
200 hours	Change hydraulic/transmission fluid filter
300 hours	Change transmission fluid, check valve clearance
600 hours	Change front axle oil, flush coolant

Service contact: ETS Marchand - 05 61 60 01 52 (repairs)

Troubleshooting

Problem	Possible Cause	Solution
Won't crank	Seat switch not activated	Sit firmly in seat
	PTO engaged	Disengage PTO
	Not in neutral	Put range lever in N
	Battery flat	Charge or jump start
Cranks but won't start	No fuel	Check fuel level
	Air in fuel system	Bleed fuel system
	Glow plugs faulty	Check/replace glow plugs
Poor power	Clogged air filter	Clean or replace
	Fuel filter blocked	Replace fuel filter
Engine overheats	Low coolant	Top up coolant
	Radiator blocked	Clean radiator fins

Emergency Procedures

• Fire: Shut off engine, evacuate, call emergency services
• Rollover: Brace yourself, do NOT jump off - stay inside
• Stuck: Do not spin wheels excessively; get assistance

Contact

Service	Contact
Dealer/Parts	ETS Marchand - 05 61 60 94 40
Repairs	ETS Marchand - 05 61 60 01 52
Training requests	TBD

ETS Marchand RN 20, 09100 St Jean du Falga Fax: 05 61 60 61 19

---

Documentation

• Operation Manual (PDF)