padreug
f1410292a8
- Add service contact in maintenance section - Add full contact details (store, repairs, address) in contact section 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
216 lines
6.8 KiB
Markdown
216 lines
6.8 KiB
Markdown
---
|
|
title: Tractor
|
|
description: Operating guide for the farm tractor
|
|
aliases:
|
|
- tractor
|
|
tags:
|
|
- equipment
|
|
- machinery
|
|
- farm
|
|
- tractor
|
|
---
|
|
|
|
# Tractor
|
|
|
|
Iseki TXG23FH compact tractor (Type GVRLE4 - 4WD with front hitch).
|
|
|
|
> [!danger] Training Required
|
|
> The tractor requires proper training before operation. Contact *TBD* for training.
|
|
|
|
## Specifications
|
|
|
|
| Spec | Value |
|
|
|------|-------|
|
|
| Make/Model | Iseki TXG23FH |
|
|
| Type | GVRLE4 (4WD, Europe) |
|
|
| Serial No | 004228 |
|
|
| Engine | E3112-B12 diesel, 1123cc, 3-cylinder |
|
|
| Engine No | 271812 |
|
|
| Power | 22.5 HP (16.5 kW) @ 2600 rpm |
|
|
| Transmission | HST (Hydrostatic), 2-speed range |
|
|
| Drive | 4WD |
|
|
| Fuel type | Diesel |
|
|
| Fuel tank | 21 litres |
|
|
| Total mass | 1300 kg max |
|
|
| Towing capacity | 1000 kg (unbraked/inertia-braked) |
|
|
| PTO (rear) | 540 rpm @ 2532 engine rpm |
|
|
| PTO (mid) | 2000 rpm @ 2476 engine rpm |
|
|
| 3-point hitch | Front and rear, Category 1, 540 kg lift |
|
|
| Location | *TBD* |
|
|
|
|
See [full operation manual (PDF)](/equipment/farm-machinery/tractor/manuals/OM-TXG23-0805-01-250.pdf) for complete specifications.
|
|
|
|
### Identification Plates
|
|
|
|
![[model-type-plaque.png|400]]
|
|
![[model-and-weight-limits.png|400]]
|
|
|
|
## Required PPE
|
|
|
|
- Steel-capped boots
|
|
- Hearing protection (if enclosed cab not available)
|
|
- High-vis vest (when working near roads)
|
|
|
|
## Pre-Operation Checks
|
|
|
|
1. Walk around inspection - check for leaks, damage, obstructions
|
|
2. Check fuel level
|
|
3. Check engine oil level
|
|
4. Check hydraulic fluid level
|
|
5. Check tyre pressure and condition
|
|
6. Ensure all guards and safety shields are in place
|
|
7. Adjust seat and mirrors
|
|
|
|
## Starting Procedure
|
|
|
|
1. Sit in the operator's seat (seat safety switch must be activated)
|
|
2. Ensure PTO is disengaged (PTO lever in OFF position)
|
|
3. Ensure HST pedal is in neutral position
|
|
4. Ensure range lever is in neutral (N)
|
|
5. Apply parking brake
|
|
6. Turn key to ON position - wait for glow plug indicator (cold starts) - see [[power-on-from-cold.png|photo]]
|
|
7. Turn key to START position - see [[power-on-from-cold.png|photo]]
|
|
8. Release key when engine starts
|
|
9. Allow to warm up 2-3 minutes before heavy work
|
|
|
|
> [!warning] Safety Interlocks
|
|
> The tractor will not start unless: seat is occupied, PTO is off, and transmission is in neutral. If the engine won't crank, check these first.
|
|
|
|
## Operating Basics
|
|
|
|
### Controls
|
|
|
|
Key controls (numbers refer to diagram below):
|
|
- **(2) Parking brake lock lever** - Locks parking brake
|
|
- **(4) Range shift lever** - High (H), Low (L), or Neutral (N) - see [[range-shift-lever-and-three-point-hitch.png|photo]]
|
|
- **(5) Rear PTO selector lever** - Engages rear PTO (540 rpm) - see [[pto-levers.png|photo]]
|
|
- **(6) Hand throttle lever** - Engine speed control
|
|
- **(7) Brake pedal** - Service brakes
|
|
- **(8) HST pedal** - Forward/reverse speed control (hydro forward/reverse)
|
|
- **(9) Differential lock pedal** - Locks rear wheels together (for traction)
|
|
- **(10) 3-point hitch position lever** - Raise/lower rear implements - see [[range-shift-lever-and-three-point-hitch.png|photo]]
|
|
- **(11) Mid PTO selector lever** - Engages mid PTO (2000 rpm) - see [[pto-levers.png|photo]]
|
|
- **(12) PTO clutch lever** - PTO on/off - see [[pto-levers.png|photo]]
|
|
- **(13) 4WD shift lever** - Engages front wheel drive
|
|
- **(14) Cutting height control knob** - Adjusts mid-mount mower height
|
|
|
|
![[instruments-and-controls.png]]
|
|
|
|
See [operation manual](/equipment/farm-machinery/tractor/manuals/OM-TXG23-0805-01-250.pdf) for full control layout.
|
|
|
|
### Driving
|
|
|
|
- Always look behind before reversing
|
|
- Use low gear on slopes
|
|
- Never turn sharply at speed
|
|
- Keep loader/implements low when travelling
|
|
|
|
### Slopes and Hills
|
|
|
|
> [!warning] Rollover Risk
|
|
> Tractors can roll over on slopes. Always drive up/down slopes, never across. Reduce speed on uneven ground.
|
|
|
|
- Maximum safe slope angle: 15° (avoid steeper slopes)
|
|
- Always face uphill when parking
|
|
- Use low range and engine braking when descending
|
|
- Engage 4WD on slopes for better traction
|
|
|
|
## Attachments
|
|
|
|
See [[attachments|Tractor Attachments]] for detailed guides on each implement.
|
|
|
|
| Attachment | Purpose |
|
|
|------------|---------|
|
|
| [[mower-attachment|Mower]] | Cutting grass and paddock maintenance |
|
|
| [[vacuum-attachment|Vacuum / Collector]] | Collecting leaves, clippings, debris |
|
|
|
|
### Attaching Implements
|
|
|
|
See the [[attachments|attachments guide]] for the full procedure. Key points:
|
|
|
|
1. Park on level ground, engine off, key removed
|
|
2. Lower 3-point hitch fully
|
|
3. Connect lower arms first, then top link
|
|
4. Connect PTO shaft (ensure it clicks in)
|
|
5. Connect hydraulics if needed
|
|
6. Raise and check security before starting
|
|
|
|
## Shutdown Procedure
|
|
|
|
1. Lower all implements to the ground
|
|
2. Disengage PTO
|
|
3. Set parking brake
|
|
4. Allow engine to idle for 1-2 minutes
|
|
5. Turn off ignition
|
|
6. Remove key
|
|
|
|
## Refuelling
|
|
|
|
- Fuel type: Diesel only
|
|
- Tank capacity: 21 litres
|
|
- Fuel storage location: *TBD*
|
|
- Never refuel while engine is running or hot
|
|
|
|
## Maintenance
|
|
|
|
### Fluid Capacities
|
|
|
|
| Fluid | Capacity | Type |
|
|
|-------|----------|------|
|
|
| Engine oil | 2.6 L | API CD or higher, SAE 10W-30 |
|
|
| Transmission/hydraulic | 11 L | UTF (Universal Tractor Fluid) |
|
|
| Coolant | 4.6 L | 50/50 antifreeze mix |
|
|
| Front axle | 4.0 L | SAE 80W-90 gear oil |
|
|
|
|
### Service Schedule
|
|
|
|
| Interval | Tasks |
|
|
|----------|-------|
|
|
| Daily | Check engine oil, coolant, hydraulic fluid levels |
|
|
| 50 hours | Change engine oil and filter |
|
|
| 100 hours | Check/clean air filter, check battery |
|
|
| 200 hours | Change hydraulic/transmission fluid filter |
|
|
| 300 hours | Change transmission fluid, check valve clearance |
|
|
| 600 hours | Change front axle oil, flush coolant |
|
|
|
|
Service contact: ETS Marchand - 05 61 60 01 52 (repairs)
|
|
|
|
## Troubleshooting
|
|
|
|
| Problem | Possible Cause | Solution |
|
|
|---------|----------------|----------|
|
|
| Won't crank | Seat switch not activated | Sit firmly in seat |
|
|
| | PTO engaged | Disengage PTO |
|
|
| | Not in neutral | Put range lever in N |
|
|
| | Battery flat | Charge or jump start |
|
|
| Cranks but won't start | No fuel | Check fuel level |
|
|
| | Air in fuel system | Bleed fuel system |
|
|
| | Glow plugs faulty | Check/replace glow plugs |
|
|
| Poor power | Clogged air filter | Clean or replace |
|
|
| | Fuel filter blocked | Replace fuel filter |
|
|
| Engine overheats | Low coolant | Top up coolant |
|
|
| | Radiator blocked | Clean radiator fins |
|
|
|
|
## Emergency Procedures
|
|
|
|
- **Fire**: Shut off engine, evacuate, call emergency services
|
|
- **Rollover**: Brace yourself, do NOT jump off - stay inside
|
|
- **Stuck**: Do not spin wheels excessively; get assistance
|
|
|
|
## Contact
|
|
|
|
| Service | Contact |
|
|
|---------|---------|
|
|
| **Dealer/Parts** | ETS Marchand - 05 61 60 94 40 |
|
|
| **Repairs** | ETS Marchand - 05 61 60 01 52 |
|
|
| Training requests | *TBD* |
|
|
|
|
**ETS Marchand**
|
|
RN 20, 09100 St Jean du Falga
|
|
Fax: 05 61 60 61 19
|
|
|
|
---
|
|
|
|
## Documentation
|
|
|
|
- [Operation Manual (PDF)](/equipment/farm-machinery/tractor/manuals/OM-TXG23-0805-01-250.pdf)
|